
24
System settings Procedure / notes
Cancelling the siren
Warning!
Risk of drowning because the acoustic alarm is
inoperable. Only deactivate the siren when the
pool is being monitored by another person.
Enter "1001" and press OK.
When the siren is deactivated it will not sound if there is
an alarm!
Activating the siren Enter "1002" and press OK.
The siren sounds if there is an alarm.
For testing the siren, see Testing the siren, page 23
Time delay before
automatically switch-
ing to passive mode
If the system determines that the pool is not being used
it will – once the time delay selected here has expired –
automatically change from active mode to passive mode.
Enter "1003" and press OK.
Enter the desired time delay and press OK:
"1" = 1 hour / "2" = 2 hours / "3" = 3 hours or "0" (does
not automatically change from active mode to passive
mode)
Alarm sensitivity
of the pool sensors
(passive mode)
This example shows a
sensitivity level of 2
Enter "1004" and press OK.
The 4 yellow LEDs above the keypad indicate the current
sensitivity by ashing:
1 LED ashing: Low sensitivity
4 LEDs ashing: Very high sensitivity
To change the sensitivity, enter a number between 1 and
4 (high sensitivity) and then press OK.
Comentários a estes Manuais